Digitize negatives with your digital camera.
Which film do you want to digitize?
-
35 mm filmThe standard frame, without sprocket holesFilm holder €54,95Complete set currently sold out -
Medium format 120Film holder from €54,95Complete set 6×6 currently sold out -
35 mm and medium formatBoth film holders €99,95Complete set currently sold out -
Minox 8×11Film holder €59,95Complete set currently sold out -
110 pocket filmFilm holder €59,95Complete set currently sold out -
35 mm with sprocket holesOptionally with the sprocket holes, for the edge-to-edge lookFilm holder €54,95Complete set currently sold out
Individual parts and add-ons
-
Copy standHolds your camera · From €149,95 -
Masks 6×4.5 to 6×9Top Plate for the 120 film holder · From €29,95 -
X-Pan maskTop Plate for the 35 mm film holder · €34,95 -
Half-frame maskTop Plate for the 35 mm film holder · €34,95 -
HoodsS, M and L, block stray light -
Alignment mirrorAlign your camera square · €14,95
How the system works
Which scanner set is right for you?
Answer a few quick questions and we’ll show you the right configuration.
Our five-layer system for DSLR/DSLM film scanning: copy stand, light source, adapter, film holder, and lens hood, modularly combinable for Minox, 110, 35mm, and medium format.
Copy Stand: Stable base
The copy stand forms the foundation: 100% parallel alignment with the film plane, height-adjustable, and vibration-free. Compatible with all common cameras.
Light source: CineStill CS-LITE
The entire film holder system is designed for the illuminated area of the CineStill CS-LITE (95 × 150 mm). High color rendering index (CRI 95+) for accurate colors.
Tip: Why CS-LITE?
- CRI 95+: Calibrated color temperature, ideal for negatives and slides
- Precisely fitting illuminated area: The 120 film holder sits directly on it; all others use Adapter Plates
- Included in all sets from “With light source” upward, or available separately
Adapter Plates: Light seal
The Adapter Plates form the interface between the CS-LITE and the film holder. They prevent stray light from below from glaring into the macro lens.
Which adapter for which format?
- Adapter Plate Mini: For Minox 8×11 and 110 pocket film
- Adapter Plate 35: For all 35mm film holders (Standard, Pano, Half Frame, Sprocket)
- 120 medium format: No adapter needed. The 120 film holder (95×150mm) sits directly on the CS-LITE
Adapter Plate Mini: Minox & 110 → CS-LITE
Light seal between small formats and CS-LITE. Prevents stray light from below.
Adapter Plate 35 — 35mm → CS-LITE
Precisely fitting frame for all 35mm film holders. Included in all sets from “With light source” upward.
120 Medium Format: Direct Fit
The 120 film holder (95×150mm) sits directly on the CS-LITE; no adapter needed.
Film Holder: The Heart of the System
The film holder consists of a Base Plate and magnetic Top Plate. The S-curve guide ensures perfect film flatness, while the magnets enable film changes in seconds, even with short film strips.
Modular Principle
Each Base Plate is format-specific. The magnetic Top Plates can be swapped, so you can scan different sub-formats with one Base (e.g., 6×6, 6×4.5, 6×7, and 6×9 on the 120 Base).
Complete Scanner Sets
Film Scanner Set 35mm: Standard (24×36mm)
Our best-selling set: S-curve Base, magnetic Top Plate with 24×36mm image window. Expandable with Pano and Half-Frame Tops.
Film Scanner Set 35mm: Sprocket Holes
Shows the full film width, including perforation holes. Dedicated Sprocket Base, compatible with 35mm Geli and adapter.
Film Scanner Set 120: Medium Format (6×6)
Direct-fit on the CS-LITE, no adapter needed. The 95×150mm Base fits precisely. Standard Top: 6×6. Expandable with 6×4.5, 6×7, and 6×9 Tops.
Film Scanner Set Minox 8×11: Subminiature
For 9.2mm film. The world's only modular camera-scanning holder for Minox 8×11. ~12,000 ppi with macro lens.
Film Scanner Set 110: Pocketfilm
For 16mm Pocketfilm. 13×17mm image window, magnetic Top Plate, S-curve guide for perfect flatness.
Magnetic Top Plates: Format Extensions
Easy to swap
Every Top Plate locks into place magnetically. To change formats, simply lift off the Top Plate and put on another one—no tools, no screws.
Sprocket = Separate Set
The 35mm Sprocket Set has a wider Base Plate than the standard 35mm set. The Sprocket Top Plate does not fit the standard 35mm Base, and vice versa. However, both sets use the same Hood (Hood M) and the same Adapter Plate 35.
Hoods: Stray Light Protection
The hoods block stray light from above and reflections on the film surface. They slide into the Top Plate via a rail system, hold securely, and can be removed in seconds.
Comparing Set Variants
“With light source” contains everything you need to get started right away with the CS-LITE, while “With copy stand” also includes the Copy Stand.
| Variant | Includes | 35mm | 120 | Minox | 110 |
|---|---|---|---|---|---|
| Film holder | Base + Top | €54,95 | €54,95 | €59,95 | €59,95 |
| With light source ★ | Film holders + Adapter + CS-LITE + Hood | €139,95 | €159,95 | €179,95 | €179,95 |
| With copy stand | “With light source” + Copy Stand MK2 | €279,95 | €284,95 | €289,95 | €279,95 |
Further Resources
Film Scanner Finder
3 questions, personalized recommendation, find the right set in under 60 seconds.
Blog: DSLR Scanning Guide
Everything about lighting setups, macro lenses, software, and workflow, explained from the ground up.
Product Range Diagram
All scanner components in a layered, clickable, clearly organized layout.
110 Pocketfilm System
Complete workflow: cutting film, loading cassettes, developing, and digitizing.
Minox 8×11 System
Subminiature Guide: film cutters, cassettes, reels, and scanning for 9.2mm film.
Battery Finder
Find the right battery for your analogue camera by brand and model.
