Film cutter for 110 format (16mm)

• Cut your own 110 film: From standard 120 or 35mm material when no fresh 110 pocket film is available to buy. With the combination module, Minox strips too.
• Safety cover protects your fingers: The pressure cover holds the film flat against the guide and protects you from the exposed blades.
• Direct manual pull-through: Less prone to errors than complex crank systems and faster to use.
• Arrives ready to use: The double-edge razor blades are installed at the factory; replacements are standard blades available everywhere.

Compatibility

The cutting modules produce unperforated film. This works with cameras that advance the film through friction rather than gears that engage with the perforation holes.

Compatible models:

• Pentax Auto 110 & Auto 110 Super
• Canon 110ED & 110FD
• Rollei A110 & E110
• Voigtländer Vitoret 110 EL
• Minox 110S (varies, please test)

Also for 16mm subminiature cameras: The unperforated strip also runs in classic submini cameras whose transport works without perforations, loaded into the respective camera cassette (e.g. RADA):

• Edixa 16 (all models, including Wirgin Edixa 16)
• Alka 16 & Franka 16 (RADA cassette)
• Fotex MiniFex
• GaMi 16 (Galileo)

Not suitable for the Rollei 16. It requires perforations for film transport.

How to test your camera:
Open the back (without film), operate the film advance, and press the shutter release. If the shutter fires, your camera is compatible. If it locks up, your camera requires perforations.

What's included

All versions are supplied with the razor blades already installed, so you can start cutting immediately.

Basic: 35mm

• 1x film cutter base
• 1x safety pressure cover
• 1x 35mm cutting module (cuts 1x 110 strip from the center)
• 4x razor blades, already installed

Combo: 35mm (including Minox)

• 1x film cutter base
• 1x safety pressure cover
• 1x 35mm combo-cutting module (cuts 1x 110 strip + 1x Minox strip)
• 5x razor blades, already installed

Pro: 120

• 1x film cutter base
• 1x safety pressure cover
• 1x 120 cutting module (cuts 3x 110 strips from the center)
• 4x razor blades, already installed

Technical details

• Material: technical plastic
• Blade type: standard double-edge razor blades, included and installed at the factory (standard replacements)
• Output format: 110 (16mm) or Minox (9.2mm)
• Perforation: No (produces unperforated film)
• Operation: manual pull-through

Description

The film cutter for 35mm and 120 film makes your 110 pocket camera usable again, even when ready-made 110 film is no longer available to buy. Cut your own 110 strips from affordable standard material: 120 medium-format film or 35mm film; with the combination module, you can also cut Minox strips.

The system is modular and designed with safety in mind. Insert the film, put on the cover (which gently holds the film in place), and pull the material through the blades by hand. The result is clean-cut edges without expensive specialist tools.

The cutter is part of our 110 pocket film system and our Minox 8x11 subminiature system: cut film, load cassettes, develop and scan—everything from one source. Learn more in the 110 System overview and the 110 Guide, as well as the Minox 8x11 overview and the Minox Guide.