Lens hoods, battery solutions and tools for the Rollei 35 family of cameras. We make most of these parts ourselves in Würzburg, each one matched to the specific model: the classic 35, the 35T with its Tessar lens or the 35S with the Sonnar.

Which accessories fit which model?

The Rollei 35 family at a glance

The Rollei 35 came in many variants, but when it comes to choosing accessories, the lens is what really matters. There are two main groups:

  • Tessar models (Rollei 35, 35 T, 35 TE, B35): 24mm filter thread, Carl Zeiss Tessar 3.5/40mm or Triotar
  • Sonnar models (Rollei 35 S, 35 SE): 30.5mm filter thread, Carl Zeiss Sonnar 2.8/40mm
  • Rollei XF 35: a special model with a PX625 battery compartment that needs its own battery adapter

Please note: The lens hoods are not interchangeable. Tessar models need the 24mm version, Sonnar models the 30.5mm version. If in doubt, check the underside of the lens, where the filter thread size is marked.


1

Lens hoods & filter adapters

The Rollei 35 was shipped without a lens hood. A design flaw? More a compromise for the sake of its compact size. If you want better contrast and colour rendition, you need a hood, and it has to match your lens.

Which hood fits which model

  • 24mm → Rollei 35
  • 24mm → Rollei 35 T
  • 24mm → Rollei 35 TE
  • 24mm → Rollei B35
  • 30.5mm → Rollei 35 S
  • 30.5mm → Rollei 35 SE

Why use a lens hood?

Both the Tessar and the Sonnar are non-retrofocus designs with relatively few coating layers, typical of lenses from the 1960s and 70s. Stray light hits them hard. The right hood cuts down on flare and brings back the contrast the glass is actually capable of. The 24mm version also includes a filter adapter.


2

Battery & light meter

The Rollei 35’s CdS meter is notorious: without a cover, it draws current all the time. Our battery saver cover solves the problem without any modification to the camera.

The Rollei 35 battery compartment trap

The Rollei 35’s CdS sensor is wired directly to the battery, and there’s no real off switch. Even when the camera is just sitting on a shelf, current keeps flowing. As a result, the PX625 cell lasts only a few weeks instead of months. The battery saver cover breaks the circuit, both optically and physically. Just slip it on and you’re done: no more worrying about changing batteries.


3

Rollei XF 35: battery cover

The Rollei XF 35 is a special case within the Rollei 35 family: it’s larger, uses zone focusing and takes a PX625 mercury battery that hasn’t been available for decades.

Why a new cover?

The original PX625 cover often goes missing or has corroded. Our adapter builds the contacts right into the cover and uses inexpensive 675 zinc-air cells as the power source. These deliver exactly 1.35V, the very voltage the light meter was calibrated for. No converting readings, no badly exposed frames.


4

Tools & Accessories

The Rollei 35 battery compartment can only be opened with a special pin. Standard tools won’t fit, which is why we make our own precision tool from stainless steel.

Works with other cameras too

Besides the Rollei 35, the tool works on any camera with the typical slotted battery compartment cover. That includes the Canon F-1 (old and new), Olympus OM-1/OM-2, Nikon F and many more. The 1.7mm stainless steel pin sits precisely in the slot without damaging the delicate thread.


5

Batteries & Consumables

The right replacement batteries for the Rollei 35 family, to keep your light meter running.


Still missing an accessory for your Rollei 35?

Add whatever you’re missing for your Rollei 35 to our wish list. We count every request, and when we plan new parts, we look first at the ones people ask for often.

Request a part