Analog Camera Accessories for Specialist Retailers

Complete digitization set for 35mm film: magnetic film holder with Dual-S flatness system (sharpness all the way into the corners, without glass plates or Newton rings), plus CineStill CS-LITE light source, light adapter, and stray-light hood. Ready to scan out of the box; all you need is a camera and tripod or copy stand. Positioned as a high-quality, more affordable alternative to Negative Supply or Valoi.

Turnkey, including CS-LITE light, adapter, and hood; only a camera + tripod/copy stand required.

Complete digitization set for medium format (120): magnetic 120 film holder with Dual-S flatness system to counteract the typical medium-format curl, CineStill CS-LITE (Direct Fit), light adapter, and hood; standard 6×6 top plate included. Ready to scan out of the box; all you need is a camera and tripod or copy stand. Additional sizes available via the top-plate expansion.

Includes 6×6 top plate + CS-LITE; additional medium-format sizes available via the expansion.

Tilt-free copy stand as a shared base for scanning: 32×32 cm base plate (20 mm screen-printed board, CNC-milled, recessed M6 threads), 60 cm aluminum profile with 3/8" tripod thread and two Fast-Lock quick clamps. Supports up to 1.5 kg without tipping and keeps the camera parallel to the film. Complements both film-holder sets for a complete scanning workstation.

Shared base for the 35mm and 120 sets; tilt-free up to 1.5 kg, 3/8" thread.

Format expansion for the 120 set: three magnetic top plates for 6×4.5, 6×7, and 6×9 in a discounted set. The 120 Pro set includes 6×6; with this expansion, you cover all common medium-format sizes. Simple clip-on masks with neodymium magnets, compatible with the 120 base plate.

Addon set 6×4.5/6×7/6×9 to complement the included 6×6; magnetic.

Adapter set for cameras with a PX625/MR9 battery compartment: The zinc-air cell delivers a constant 1.35 V, like the original mercury cell. Light meters provide accurate readings. The three-point contact fits cameras from all manufacturers. Set of adapter and batteries, ready for sale; the cells generate recurring demand as a consumable.

Three-point contact covers PX625/MR9 cameras across manufacturers.

The rechargeable alternative to the PX625 set: USB-C-chargeable V80H batteries deliver 1.25–1.30 V, close to the original value, for reliable exposure readings with negative film. The Pro Pack bundles a charger and two batteries. The long-lasting solution for the same PX625/MR9 cameras.

Rechargeable long-term solution for PX625/MR9 cameras; charges via standard USB-C.

Replaces the PX27 battery in the Minox 35 GT/EL/GL and PL/PE/EC: Four SR44 silver-oxide cells provide the exact PX27 dimensions of 12.7 × 20.5 mm and deliver stable voltage without alkaline drift. Batteries included, ready for sale, as a consumable item with recurring demand.

Covers all Minox 35 variants (GT/EL/GL/PL/PE/EC).

Replaces the 5.6 V PX27 in the Rollei 35 SE and TE with four commercially available SR44/LR44 button cells. Batteries included, ready to use, with no need for consultation at the counter. The Rollei 35 remains widely used in the analogue segment, so demand is steady.

Ongoing demand: every Rollei 35 SE/TE needs a PX27 replacement and runs on standard button cells (SR44/LR44).

Adapter for cameras with the obsolete PX640 mercury cell (1.35 V): Minolta Hi-Matic E/F and Olympus 35 EC. Holds commercially available type 675 zinc-air cells and provides a stable 1.4 V; measurement errors caused by 1.5 V alkaline cells are eliminated. Batteries included, ready to use.

Ongoing demand among Hi-Matic E/F and 35-EC owners.

Replaces the 4.5 V PX21 specialty battery with standard button cells and keeps the Praktica LLC/PLC/VLC/EE operating. Includes three button cells, so no separate cell procurement is needed. Every actively used camera in these series depends on replacing the specialty battery.

One stock item covers four Praktica models, including 3 button cells and ready to use.

Quick-load spool based on the Leica SPOOM take-up spool (Cat. No. 14021), model-specific for the Leica M3. Brings the M6 tulip system to the classic body and shortens film loading. The film engages directly with the installed spool, without removing it. Retrofit part with steady demand.

Model-specific for Leica M3: Rapid Load without removing the spool.

Quick-load spool based on the Leica SPOOM take-up spool (Cat. No. 14021), tailored to the Leica M1, M2, and IIIg. The M6 tulip system allows loading without removing the spool and shortens the loading process. Replacement and upgrade part with steady demand.

For Leica M1, M2, and IIIg: Rapid Load without removing the spool.

Replacement battery compartment covers for the Canon AE-1, A-1, and AE-1 Program. A broken or lost cover is the most common mechanical defect affecting these bodies. Version 2 (July 2025) with improved fit and stability; installs with a small Phillips screwdriver. The 2-pack supports both repair intake and counter sales: steady demand in the analogue segment.

Fits Canon AE-1, A-1, and AE-1 Program.

Tool for opening and closing battery compartment covers with coin slots without causing damage, including on Rollei 35, Minox 35, Canon F-1, and Olympus OM. Improvised coins or screwdrivers can quickly leave scratches on the cover. Complementary product for button cells and adapters, as well as a standard workshop tool.

Additional sales alongside button cells and battery adapters, including for Rollei 35, Minox 35, Canon F-1, and Olympus OM.