Film Scanner Set for Super 8 and Regular 8
Film Scanner Set for Super 8 and Regular 8
Availability for pickups could not be loaded
At least 2 years’ legal guarantee
At least 2 years’ legal guarantee
3-year guarantee
free of charge, in addition to your legal guarantee
3-year guarantee
free of charge, in addition to your legal guarantee
If one of our parts breaks with normal use within three years, we repair or replace it free of charge.
More information about your rights in a specific country · Full version
Free shipping within Germany
Free shipping within Germany
Free shipping, delivered to your door in 2-4 business days.
30-day money-back guarantee
free returns in Germany
30-day money-back guarantee free returns in Germany
You can try out any product for 30 days. If you’re not happy with it, we’ll refund the full purchase price, including shipping costs. No ifs, no buts.
- Scan cine film frame by frame: The film channel guides 8 mm film, both Super 8 and Regular 8, over the light source, and you photograph each frame individually with your digital camera.
- Glassless film path: The dual S-curve tensions the strip across its full width, with no glass plates and therefore no Newton rings.
- Top Plate off in one easy move: Lift it off, lay the film in, let it snap back into place magnetically; even short snippets and single scenes fit, no threading needed.
- Sealed against stray light: Underneath, the CS-LITE Adapter Modul S closes the gap to the light source; on top, the lens hood shields the lens (both included from “With light source” upward).
You’ll also need:
- Digital camera with a macro lens (for magnification, see the FAQ)
- Copy stand, or a tripod with a tilting center column (for “Film holder” and “With light source”)
- Light source (with the “Film holder” set)
Compatibility
Compatibility
Film (8 mm wide):
- Super 8
- Regular 8 (Normal 8), same film width as Super 8; we haven’t tested it with Regular 8 film ourselves yet
- Double Super 8 (DS8) and Double 8 only once slit into two 8 mm strips, for example with our film slitter for Bolex H8, Canon DS-8 and Quarz Double 8; uncut (16 mm wide), the film won’t fit in the film channel
Light sources (universally compatible):
- CineStill CS-LITE / CS-LITE+ (SpectraColor)
- Negative Supply Light Source (Basic/MK1/Pro)
- Kaiser Slimlite Plano
- Raleno LED panel (e.g. PLV-S116)
- Jack Scanlight
- Any light source with an illuminated area of ≥ 52 × 120mm (= footprint of the Base Plate)
What's included
What's included
| Included | Film holder | With light source | Everything but camera and lens |
|---|---|---|---|
| Film holder: Base Plate and Top Plate for 8 mm film | ✓ | ✓ | ✓ |
| Instructions (German and English) | ✓ | ✓ | ✓ |
| CineStill CS-LITE light source | – | ✓ | ✓ |
| CS-LITE Adapter Modul S | – | ✓ | ✓ |
| Hood Modul M (lens hood) with 2× extension tubes (40mm and 60mm) | – | ✓ | ✓ |
| Copy stand with sliding carriage (30 × 60 mm aluminum extrusion, 70 cm, 35 × 45 cm base board in 21 mm birch), 5 mm hex key and assembly instructions | – | – | ✓ |
| Leveling base instead of a tripod head (with 1/4" to 3/8" adapter screw, hex key and instructions) | – | – | ✓ |
If you already own a CineStill CS-LITE, say from a 35mm set, add the CS-LITE Adapter Modul S to your order with the “Film holder” option, as it isn’t included there. Only this plate masks the light surface around the narrow holder; the adapter plate from the 35mm set won’t do the job.
Technical details
Technical details
- Material: Engineering plastic, matte black, non-reflective
- Film channel: 8.12mm wide (for 8 mm film)
- Aperture: 6.1 × 7.16mm (along × across the film)
- Overall dimensions (Base Plate + Top Plate): 120 × 52 × 29mm (L × W × H)
- Film plane above the surface it sits on: 13.8mm; with the CS-LITE Adapter Modul, 15.3mm above the light surface
- Rubber feet: 2mm high, Shore 70A, non-slip, scratch-proof
- Fastening: 4× neodymium magnets (Top Plate held in place magnetically)
- Weight, Base Plate + Top Plate: approx. 55g
- SKU: 1962
Description
Description
With this film holder you can digitize Super 8 film, and Regular 8 as well: it holds the 8 mm strip flat over an illuminated surface while you photograph the frames one after another with your digital camera. Home-developed Double 8 and DS8 fit just the same once slit.
The holder is part of our modular Film Scanner System: it shares its footprint, magnets, CS-LITE Adapter Modul S and lens hood with the Minox holder, while the film channel and aperture have been newly designed for 8 mm film. Designed in Würzburg. The Film Scanner Finder tells you which set suits you after three questions, and the product range diagram shows the full layered setup with every part.
Frequently asked questions
Frequently asked questions
Which lens do I need for Super 8?
A Super 8 frame measures 5.79 × 4.01 mm, a Regular 8 frame 4.8 × 3.5 mm. With a 1:1 macro lens, a Super 8 frame fills about one sixth of the width of a full-frame sensor, so on a 24-megapixel camera that’s just over 950 pixels. For more resolution you need a higher magnification, for example with extension tubes, a bellows or a high-magnification macro lens.
How do I turn the individual frames back into a film?
You advance the strip by hand, one frame at a time, and photograph each frame. Afterwards, you assemble the photos as an image sequence in video editing software. Super 8 was usually shot at 18 frames per second. A Super 8 cartridge with 50 feet (15.24 m) of film holds 3,600 frames.
Download the instructions as PDF (German and English)
Show full details

Customer reviews
Transparency: Every customer who reviews an item bought from us receives a discount code for their next order, regardless of the star rating.
Reviews come from customers who ordered the item from us. We send the link by email after shipping; it belongs to exactly one order. That is why every review given this way carries the note “Verified purchase”.
Lost the link? A short message with the order number to info@ausgeknipst.de is enough and we will send it again.
No reviews yet. After a purchase we ask for one by email.
Transparency: Every customer who reviews an item bought from us receives a discount code for their next order, regardless of the star rating. “Verified purchase” means the review came through the review link of an order in our shop. How we collect and check reviews
We're Anto & Vladi
Support a young startup
Looking for innovative solutions instead of mass-produced gear? With us, you’re not buying from an anonymous wholesaler but directly from the founders. We (Anto & Vladi) started our business in Würzburg in October 2021 to help you bring film photography back to life.
Designed by engineers
Engineered in Würzburg
We don’t sell anything we wouldn’t use ourselves. We’re engineers and camera nerds, and we know that precision matters, especially with camera gear. That’s why we design our parts ourselves in Würzburg, and we make and assemble most of them here too. Batteries and rechargeables are bought in from suppliers such as Varta.
From Germany to anywhere in the world
Fast DHL shipping
Don’t want to wait forever for your part? We pack every order in Würzburg and ship it on the next shipping day (Monday, Wednesday or Friday). Within Germany, it then reaches you in 2-4 days with DHL or Deutsche Post.