Minox 35 EL vs. GT vs. ML vs. GT-E: The Ultimate Guide
Share
More than 100 Minox 35s have passed through our hands so far, and about half of them were broken. This 35mm camera only got so small because it packs a lot of electronics for its time, and that’s exactly what makes it prone to failure. Often you hear the click when you press the shutter release, but the shutter stays closed. When you’re buying, condition matters more than the letters on the body.
Still, I’ll commit to a recommendation on the models: For most people, the GT is the right choice, the best-seller of the range and easy to find. It has the backlight switch, which doubles the exposure, and the self-timer; the EL, the original, has neither. Many consider the ML the best model, but it isn’t necessarily better than a GT in good condition. If you want more, go for the GT-E. It focuses down to 70 cm, closer than the earlier models, and runs on two lithium batteries, whereas the GT needed a mercury cell from the factory that is now banned and has to be replaced.
Anyone who knows me knows that the Minox 35 is one of my all-time favorite cameras. At Ausgeknipst we design parts for dozens of camera systems. But if I’m honest, there’s one camera I keep slipping into my bag whenever I head out on my own time. It isn’t a Leica, and it isn’t a Nikon. It’s my beat-up Minox 35 GT (on the right in the photo).

Why? Because it’s a piece of pocket-sized engineering. In 1974, Minox (until then best known for spy cameras) stunned the photo world with it: a full-frame 35mm camera that was smaller than many half-frame cameras and, at just under 190 g, only about half the weight of the already very popular Rollei 35, while also being noticeably slimmer in your pocket. What makes the Minox 35 so great compared with the Rollei 35 is this: when you’re not using the camera, the lens disappears behind a hinged cover, so it stays protected in your pocket. And because the body is made of glass-fiber-reinforced Makrolon, the camera weighs next to nothing.

But here’s the catch: the Minox 35 could only get this small because it packs a lot of electronics for its time, and unfortunately that’s exactly what makes it fairly prone to failure. Of the more than 100 Minox 35s that have passed through my hands since Ausgeknipst was founded, I’d estimate about 50% were broken (we were able to repair around 30% of the broken ones, since usually all that’s needed is a cleaning of the shutter magnet).
But more on that later. First, you need to decide on a model, and that’s exactly what this guide is here to help with: finding the right model and keeping it alive.
The Minox originally ran on the PX27 mercury cell, which has since been banned. With our precision-fit battery adapter, you can power your camera with four modern SR44 button cells without any trouble. Disclaimer: we sell some of the products mentioned here. Even so, this article is meant first and foremost to help you, not as a sales pitch.
Part 1: The Minox family tree (which one should I buy?)
There are countless variants, but we can roughly sort them into three families. Here’s an overview to help you find your way through the jungle of model names.
1. The classics (EL, GL, GT, PL)
These are the models with the characteristic sloping top plate and the needle in the viewfinder.
Minox 35 EL (1974): The one that started it all. Aperture priority (you choose the aperture, the camera sets the shutter speed). Historically important, but still rough around the edges technically (no backlight switch, no self-timer).

Minox 35 GL (1979): The update. It gained a backlight switch (“2x”) that doubles the exposure. An important feature!

Minox 35 GT (1981): The bestseller and my personal favorite. It has everything the GL has, plus a self-timer. The lens is the legendary Color-Minotar 35 mm f/2.8: sharp and contrasty, with a character you’ll recognize in your pictures.

Minox 35 PL (1982): The “Program” version. Fully automatic exposure for people who don’t want to think about apertures. Good for snapshots, but with less creative control.

Heads-up on power: These models originally ran on the PX27 mercury battery (5.6 V), which is no longer available.
Our solution for the Minox 35 EL, GL, GT and PL: Our PX27 adapter is a sleeve that holds four SR44 button cells and sits in the battery compartment just like the original cell. The standard set for €19.95 already includes the four cells. It doesn’t fit the ML, MB or MDC; those take the PX28 adapter covered in the next section.
The fix: The Minox electronics use a bridge circuit, so they tolerate small variations in voltage: the 6 V from four SR44 button cells is no problem electrically (why not LR44s is explained below in the operating tips). What really matters is the battery adapter, a sleeve. The button cells are too small on their own: without an adapter, they either don’t make contact or can even cause a short circuit. Our PX27 adapter holds the modern button cells, connects them correctly and makes sure your Minox gets reliable power again. Alternatively, you can use the more expensive Golden Power PX27. However, it has less capacity than four button cells and is often only available from specialist shops.

You’ll find all the info on batteries and instruction manuals here: Minox 35 battery & manual overview
2. The “automatics” (ML, MB)
From 1985 on, the design got a little boxier (the “brick” shape).
Minox 35 ML: For many people, the best model of the lot. The ML offers program mode and aperture priority on top. Instead of a needle, you get LEDs in the viewfinder. It also has an “exposure lock” that holds the meter reading, which is extremely useful in tricky light.

Minox 35 MB: Basically an ML without program mode. Aperture priority only.

Powering this series: From the factory, these models take the PX28 battery (6 V). It’s harder to find these days than standard button cells, so you’ll need our PX28 adapter. The adapter is a simple sleeve with no electronics that holds four individual, inexpensive SR44 button cells.
3. The Moderns (GT-E, GT-S, MDC)
In the late ’80s, things got an update under the hood. The lens was now called the “MC Minoxar” (multi-coated) and often had a built-in skylight filter.
Minox 35 GT-E (1988): Technically very mature. Minimum focusing distance down to 70 cm (instead of 90 cm). Sturdier internals (the GT-S is a GT-E that reads the film speed automatically from the DX code on the cartridge).

Minox 35 MDC: The luxury version of the ML, with a titanium-anodized aluminium shell. More of a display-cabinet piece, but gorgeous. It also exists as a gold-plated collector’s edition (see the cover photo).

Battery note: The GT-E and GT-S have a redesigned battery compartment and take two CR 1/3 N lithium batteries from the factory (3 V each = 6 V). No adapter needed here. The MDC, being a derivative of the ML, takes the PX28 and needs our PX28 adapter.
Part 2: Buying advice (common Minox ailments)
If you come across a used Minox 35 at a flea market or on eBay, there are three things you need to check. Otherwise you’re buying electronic junk.
The “click” test (shutter)
The Minox 35’s biggest weak spot is the shutter. When the camera sits unused for a long time, the magnets gum up or the electronics give out.
The test: Put a battery in, open the front cover all the way, work the film advance lever twice and press the shutter button. You’ll hear a “click”. But: open the back, hold the camera up to the light and look through the lens from behind. Do the blades actually open? Quite often you get the click (that’s the release magnet), but the shutter stays closed. We used to repair this a lot, but it’s fiddly work.
DIY repair tip: If you feel up to cleaning the shutter magnet yourself, you’ll find the video guide here: YouTube video: Cleaning the shutter magnet.
The ISO dial of death
On many GTs and GLs, the markings on the ISO dial on the bottom of the camera have simply worn off. You can no longer tell whether you’ve set ISO 100 or 400. Annoying, but far from a write-off.
The fix: We make a replacement plate for the ISO dial with the numbers engraved rather than just printed. Stick it on once and never think about it again.

The lost battery cover
A classic. These little things are tiny and missing on 30% of used cameras. No cover, no circuit. No circuit, no shutter release. If yours is missing: we carry replacement covers that are electrically conductive themselves, so they make reliable contact.
Important handling tips
Three quirks every Minox newcomer needs to know before deciding their camera is broken:
- Double-stroke film advance: On the Minox 35 you always have to work the film advance lever twice to fully cock the shutter. After just one stroke, the camera won’t fire. That’s simply how it’s designed.
- Front cover = power switch: The electronics only get power once the front cover is opened all the way (100%) and has clicked into place. Even at 99%, the camera won’t fire. When you open it, make sure you feel it lock in with a clear click.
- SR44, not LR44: If you’re using one of our adapters with button cells, make sure you use SR44 (silver oxide) rather than LR44 (alkaline). Alkaline cells lose voltage steadily as they drain, and since the Minox has no real voltage regulation, that eventually leads to incorrect exposures. SR44 cells hold a steady 1.55 V right to the end.
Part 3: How to take better pictures (zone focus!)
The Minox 35 isn’t an autofocus point-and-shoot (apart from the ugly late AF models, which we won’t be talking about here). It uses zone focusing.
You have to guess the distance. Sounds scary? It isn’t.
- At f/8 with the focus set to 3 m, almost everything from 2 m to 5 m is sharp.
- For landscapes: infinity.
- For street: f/8, prefocus at 3 m (“snap focus”) and just fire away when your subject is in the zone.
The shutter release is almost silent, which makes the Minox a real ninja camera for street photography.
Which Minox 35 I’d recommend
Is a Minox 35 still worth having today? Yes. Hardly any other camera packs so much image quality into every cubic centimetre. My best photos were taken with the Minox 35 GT, simply because I always had it with me when the big SLR was too heavy to bring along.
My buying advice:
Best value for money: The Minox 35 GT. The best balance of features and availability.
Pro tip (upgrades): The Minox 35 GT-E or the MDC. The GT-E offers the best optical and technical upgrades (multi-coated lens, 70 cm minimum focus distance). The MDC is the only one with a titanium-anodized aluminium shell: an indestructible collector’s piece (but pricey!). The ML does give you LEDs in the viewfinder, but it isn’t necessarily any better in quality than a GT in good condition.
If you need accessories to get your flea market find back in shape, feel free to drop by our shop. Keeping these legends alive is what we specialise in.
Good light! Yours, Vladi
Useful links from this article:
- PX27 battery adapter (for EL, GL, GT, PL)
- PX28 adapter (for ML, MB, MDC)
- Replacement ISO dial plate
- Replacement battery cover
- Filter adapter (for using filters)
You’ll find all the compatible products, films and adapters in our Minox 35 overview.
2 comments
Hola Francisco,
muchas gracias por tu comentario.
Ese fallo en la Minox 35 EL suele deberse a problemas en el circuito electrónico o en los imanes del obturador. Repararla profesionalmente a menudo supera el valor de mercado de la cámara, ya que requiere desmontarla por completo y conseguir piezas donantes. Por lo general, sale más a cuenta buscar otro modelo que funcione, como una GT o una ML (la ML cuenta con un obturador electromagnético más moderno y fiable).
Si de todos modos quieres pedir un presupuesto para conservarla, nosotros no hacemos reparaciones, pero puedes consultar nuestra lista de talleres especializados:
https://ausgeknipst.de/pages/kamera-reparatur
Muchos saludos,
Vladi
Ha sido un hallazgo encontrar esta vuestra página, gracias!!. Ahora la pregunta, tengo una 35 EL, está muy bien cosméticamente pero averiada (lo habéis descrito perfecto, suena el click pero no abre obturador); ¿es recomendable arreglarla o es mejor comprar otra (GT, ML)?