Lens hood for Mamiya C330, C220 (55-250mm Sekor)

• Replacement for the hard-to-find original clamp-on hood: Reproduction of the classic clamp-on hoods for the Mamiya C series, covering both the taking and viewing lenses.
• Less flare, more contrast: Reduces stray light from the sides and provides better contrast in your medium-format shots.
• With integrated filter adapter: The screw-in version provides a 62mm front thread on the lens’s 46mm filter thread — modern filters for a classic camera.

Compatibility

Suitable for Mamiya C-series cameras (C2, C22, C220, C220f, C3, C33, C330, C330f, C330s).

Variants 1 and 3 clamp onto the lens barrel and are independent of the filter thread:

• Variant 1: 55mm f/4.5, 65mm f/3.5, 80mm f/2.8, 105mm f/3.5 D / DS
• Variant 3: 135mm f/4.5, Super 180mm f/4.5, 250mm f/6.3

Variant 2 screws in and has a 46mm thread. Sekor lenses were made with three different filter threads — the same focal length may have a different thread depending on the version:

A 40.5-to-46mm step-up ring enlarges the opening and does not affect the image. We advise against using the reverse setup: On the 65mm f/3.5 with its 49mm thread, a step-down ring reduces the opening in front of a wide-angle lens and causes corner shading. Variant 1 is the right choice for the 65mm. On most Sekor lenses, the filter thread is located on the front ring — check there if in doubt.

Scope of delivery

• Variant 1 (original reproduction): 1x clip-on double lens hood, wide-angle to portrait
• Variant 2 (screw-in): 1x compact lens hood with a 46mm thread and 62mm filter adapter
• Variant 3 (original reproduction): 1x clip-on double lens hood, telephoto

Technical details

• Material: engineering plastic
• Color: Black
• Connection for variants 1 and 3: clamp mechanism
• Connection for variant 2: 46mm screw thread on the lens side, 62mm filter thread on the front

Description

The original clamp-on hoods for your Mamiya C330 and the other C-series cameras are now almost impossible to find — we manufacture the replacement ourselves. Variants 1 and 3 are based on the design of the classic clamp-on hoods and cover both the taking and viewing lenses. Variant 2 is the modern alternative for the taking lens: It screws directly into the 46mm filter thread and provides a 62mm thread on the front — allowing you to use common filter sizes with your Mamiya lenses.