What battery replaces the PX825?

44 cameras from 10 brands take the PX825

The PX825 is no longer on sale. Replacing it is simpler than with the mercury types, because the original cell already delivered 1.5 volts: the adapter takes a standard LR44 or SR44 and passes the voltage straight through, with no conversion.

That takes care of the problem that otherwise makes the switch tricky. With a mercury cell the voltage is lower, and an old light meter running on the wrong voltage gives the wrong reading.

PX825 battery or adapter? Order it direct from us

Shop PX825 at Ausgeknipst

Agfa

2 cameras
Camera Battery Guide
Agfa Agfamatic 126 2x PX825
Agfa Rapid PX825 Manual

Argus

3 cameras
Camera Battery Guide
Argus 254 Instant Load PX825
Argus 264 Instant Load PX825
Argus 364 Instant Load PX825

Dacora

1 camera
Camera Battery Guide
Dacora Instacora Electronic 2x PX825

Gaf

8 cameras
Camera Battery Guide
GAF 100 XF 2x PX825
GAF 100A 2x PX825
GAF 102A 2x PX825
GAF 200 XF 2x PX825
GAF 220 Instant Load PX825
GAF Anscomatic Cadet PX825
GAF Anscomatic Cadet Flash PX825
GAF Seventy Six PX825

Hanimex

1 camera
Camera Battery Guide
Hanimex IC 2000 2x PX825

Kodak

21 cameras
Camera Battery Guide
Kodak Instamatic 124 PX825
Kodak Instamatic 134 PX825
Kodak Instamatic 154 PX825
Kodak Instamatic 174 PX825
Kodak Instamatic 204 PX825
Kodak Instamatic 224 PX825
Kodak Instamatic 234 PX825
Kodak Instamatic 304 PX825
Kodak Instamatic 314 PX825
Kodak Instamatic 333 PX825
Kodak Instamatic 404 PX825
Kodak Instamatic 414 2x PX825
Kodak Instamatic 500 PX825
Kodak Instamatic 704 PX825
Kodak Instamatic 714 PX825 Manual
Kodak Instamatic 800 PX825
Kodak Instamatic 804 PX825
Kodak Instamatic 814 PX825
Kodak Instamatic Reflex PX825 Manual
Kodak Instamatic S10 PX825
Kodak Instamatic S20 PX825 Instructions

Minolta

1 camera
Camera Battery Guide
Minolta 16 QT PX825 Manual

Minox

2 cameras
Camera Battery Guide
Minox B4 PX825
Minox C4 PX825 Manual

Voigtlander

2 cameras
Camera Battery Guide
Voigtländer Vitessa 1000SR PX825 Manual
Voigtländer Vitesse 500 AE 2x PX825 Manual

Zeiss Ikon

3 cameras
Camera Battery Guide
Zeiss Ikon Voigtländer Prontor 500 electronic PX825 Manual
Zeiss Ikon Voigtlander Vitessa 500 AE 2x PX825 Manual
Zeiss Ikon Voigtlander Vitessa 500 SE PX825 Manual

PX825 battery FAQ

What is a PX825 battery?

The PX825 is a 1.5 volt alkaline manganese button cell (Zn/MnO₂), made from the late 1960s onwards by Mallory, Eveready, Varta and Kodak, mainly to power simple light meters, flashcube firing and electronic shutters in compact and Instamatic cameras. Despite the “PX” prefix, which people often associate with mercury cells like the PX625, the PX825 was an alkaline cell from the start. Dimensions: 23.2 × 6.1 mm. Common cross-references: V825PX (Varta), LR53 (IEC), EPX825 (Eveready), KA825 (Kodak), NEDA 1129AP.

Which cameras take a PX825 battery?

The PX825 was mainly used in the Kodak Instamatic series: Kodak Instamatic 124, 154, 174, 204, 224, 304, 314, 404, 500, 704, 714, 800, 814, Instamatic Reflex and S10/S20. It also turns up in models from other manufacturers, such as the Minox B4 and C4, Voigtländer Vitessa 1000SR, Zeiss Ikon Voigtländer Prontor 500 electronic, Vitessa 500 AE/SE, GAF 100 XF / 102A / 200 XF / Anscomatic, Argus 254/264/364 Instant Load, Hanimex IC 2000 and Agfa Agfamatic 126. Many of these cameras take two PX825 in series (3 V total). You’ll find the full, searchable list of 43 camera models at the top of this page.

Can you still buy the PX825 today?

Original PX825 cells have practically not been made since the early 1990s. They were discontinued for commercial reasons: demand for 23.2 mm button cells for vintage Instamatic cameras simply became too small, and the physical format is uneconomical compared with modern, much smaller standard alkaline and silver oxide cells. Worth knowing: the PX825 was an alkaline cell from the start, so the EU mercury bans (Battery Directive 2006/66/EC, Batteries Regulation 2023/1542) don’t apply to it. Even so, replacements are easy to get today, either as a drop-in replacement with the same shape (e.g. the silver oxide Exell S825PX, also sold as LR53/BLR53/KA825) or by using an adapter.

What replacement options are there, and what are the pros and cons of each?

There’s no single “best” replacement, but three options are common:

  • Exell S825PX (silver oxide, 1.55 V). The direct drop-in: A replica with an identical form factor and the original dimensions of 23.2 × 6.1 mm. No adapter needed, just pop it in. Silver oxide delivers a constant voltage across almost the entire discharge curve. Available from specialist retailers such as mdbattery or smallbattery.company.org.uk. Also sold under the designations LR53, BLR53 and KA825.
  • Adapter with two small 1.5 V cells (the Ausgeknipst solution): A plastic adapter fills the large PX825 compartment and holds two modern LR43/LR54 or silver oxide SR43/SR54 cells, wired in parallel to deliver the nominal 1.5 V. Advantages: standard cells you can buy anywhere, long life and an exact voltage match with the original alkaline PX825. Available from Ausgeknipst as the PX825 adapter for two cells.
  • LR44/SR44 with a spacer ring: A single LR44 (alkaline, 1.5 V) or SR44 (silver oxide, 1.55 V) plus a matching spacer ring fills out the compartment mechanically. Cheap and available everywhere; for cameras that need two PX825 in series (3 V), you have to stack two of these adapters. Silver oxide delivers a more constant voltage than alkaline.
Does the voltage difference of a replacement really affect exposure?

With the PX825, less so than with mercury types like the PX625: the original PX825 was already a 1.5 V alkaline cell, so modern 1.5 V alkaline (LR43/LR44) and 1.55 V silver oxide (SR43/SR44, Exell S825PX) cells are practically a direct electrical match. A voltage above the nominal value makes the meter think there’s more light than there is → underexposure; a lower voltage, conversely, leads to overexposure. With slide film, any exposure error is critical; color negative film tolerates one to two stops and copes much better with overexposure than with underexposure.

What matters more than the absolute value is the consistency of the voltage across the discharge curve: alkaline cells (including the original PX825) drop steadily from around 1.55 V to about 1.2 V. That leads to shifting meter readings over the life of the battery. Silver oxide cells, on the other hand, hold their voltage steady through almost the entire discharge, which makes them the technically cleanest option for light meters. That said, most PX825 cameras are simple Instamatic snapshot cameras with a forgiving CdS bridge circuit, so in practice the difference rarely matters.