Which battery replaces the PX640?
42 cameras from 13 brands use the PX640
The PX640 hasn’t been available for years. Our adapter brings a standard 675 (PR44) zinc-air cell up to PX640 size, so it then sits in the battery compartment just like the original cell.
The voltage stays steady at around 1.4 volts instead of dropping off over the cell’s life the way an alkaline battery’s does, and that is exactly what old light meters are sensitive to. In the camera, a zinc-air cell usually lasts 2 to 3 months, counted from when you peel off the protective tab, not from your first shot.
Buy a PX640 battery or adapter direct from us
Shop PX640 at AusgeknipstCanon
5 camerasFuji Fujica
4 camerasHoneywell Elmo
2 cameras| Camera | Battery | Guide |
|---|---|---|
| Honeywell Pentax 1°/21° Spotmeter | PX640 | |
| Honeywell Pentax 3°/21° Spotmeter | PX640 |
Honeywell Pentax
2 cameras| Camera | Battery | Guide |
|---|---|---|
| Honeywell Pentax 1°/21° Spotmeter | PX640 | |
| Honeywell Pentax 3°/21° Spotmeter | PX640 |
Minolta
6 camerasOlympus
4 camerasPentax
4 camerasRicoh
4 camerasYashica
6 camerasLooking for a different battery type?
We stock adapters and alternatives for hard-to-find battery types such as the PX625, PX27 and many more.
Browse all batteriesPX640 battery FAQ
What is a PX640 battery?
The PX640 is a 1.35-volt mercury cell (mercuric oxide/zinc chemistry) made from the 1960s onwards by Mallory, Varta and Eveready, mainly to power light meters and motor drives in film and cine cameras. It’s the noticeably taller sibling of the better-known PX625: roughly 15.6–16.0 × 11.2 mm, so almost twice as tall as the PX625 with the same diameter, and often described as a “fat button” or “barrel cell”. Equivalent designations: HM-N (Mallory), H-N / E640 (Eveready), NR52 (National), MR52 / LR52 (IEC), V640PX (Varta).
Which cameras take a PX640 battery?
The PX640 was fitted to a range of viewfinder cameras and cine cameras from the late 1960s and 1970s: Yashica Electro 35 FC and Electro 35 GX, Olympus 35 EC / EC2 / ECR / ED, Minolta Hi-Matic 5, Hi-Matic E, Hi-Matic F and CS, Fuji/Fujica Date as well as GA / GE / GER, Canon Canodate E, Canon Cine Canonet 8, Canon Date-Matic, Canon Motor Zoom 8 EEE, Chinon 35 EE-II, Ricoh Elnica 35 / 35M / F, Petri Computor II (takes two cells) and Petri ES Auto, Miranda Sensoret, plus light meters such as the Pentax/Honeywell Spotmeter series and the Sekonic L-88 Microlite. You’ll find the complete searchable list of all 41 models at the top of this page.
Why can’t you buy the PX640 anymore?
Button cells containing mercury, like the PX640, were banned in the EU under the Batteries Directive 2006/66/EC. The last legal stock ran out around 2009. In the US, a similar ban has been in place since 1996 under the Mercury-Containing and Rechargeable Battery Management Act. The problem isn’t the battery itself but the mercury pollution it causes when it isn’t disposed of properly. And since the PX640 was only ever used in a fairly small number of camera models, no manufacturer has ever produced a direct 1:1 replacement, unlike the popular PX625.
What are the options for replacing a PX640, and what are the pros and cons of each?
There’s no single “best” replacement. Each of the following options has its own strengths and weaknesses:
- Size 675 hearing aid batteries + PX640 adapter: A size 675 zinc-air cell with a spacer ring that brings it up to the larger PX640 dimensions. The correct 1.35–1.4 V, and the cells are cheap, standard hearing aid batteries you can buy anywhere. Before fitting, peel off the protective tab and leave the cell out in the air for 5 minutes so the voltage can settle. Available from Ausgeknipst as the 675 → PX640 adapter set.
- Wein-Cell (MRB640): A zinc-air cell in the original PX640 size with the correct 1.35 V. Relatively expensive and only sold by specialist photo shops, and like all zinc-air cells it usually lasts only 2 to 3 months once activated.
- Rechargeable NiMH battery in PX640 format: At around 1.2–1.3 V, NiMH cells sit slightly below the target voltage, and they’re rarely available in the right barrel shape. For the PX640 there’s no established standard solution like the V80H set for the PX625.
- Adapter with Schottky diode for SR44/LR44: Steps a regular SR44 silver oxide cell down to around 1.35 V. Pros: standard button cells you can get anywhere, and a long life. Cons: the camera’s battery check often doesn’t read correctly, and the adapters are expensive and complicated to make in the tall PX640 format. Currently offered mainly by Kanto Kamera (Japan); an Ausgeknipst version is in development.
Does the voltage difference of a replacement really affect exposure?
That depends on the camera, the film and the replacement battery you choose. A voltage higher than 1.35 V (alkaline 1.5 V, silver oxide 1.55 V) makes the meter think there’s more light than there is → roughly one to 1.5 stops of underexposure. A lower voltage, on the other hand, leads to overexposure. With slide film, any exposure error is critical; color negative film forgives one to two stops and handles overexposure far better than underexposure, so a slightly low voltage tends to be the lesser evil.
Even more important than the absolute voltage, though, is consistency across the entire discharge curve: alkaline and standard silver oxide cells lose voltage steadily and give fluctuating readings over their lifetime. That’s what made them particularly unsuitable for analog light meters. Mercury cells, by contrast, held a steady 1.35 V for about 95% of their discharge, and that was exactly the reason for their historical success. Zinc-air (Wein-Cell and size 675 hearing aid batteries) and NiMH behave in a similarly steady way, which makes them the technically cleaner replacement options.