What battery replaces the PX32?
26 cameras from 3 brands use the PX32
The PX32 (E164) was a mercury battery and hasn’t been available for years. The adapter lets you run your camera on a standard 4LR44.
At 17.1 x 44.9 mm, it drops straight into the battery compartment: just put it in and keep shooting. No modifications to the camera are needed.
Buy a PX32 battery or adapter directly from us
Shop PX32 at AusgeknipstSekonic
2 cameras| Camera | Battery | Guide |
|---|---|---|
| Sekonic L-256 Light-Meter | PX32 | Manual |
| Sekonic L-258 Flashmeter | PX32 |
Yashica
23 cameras| Camera | Battery | Guide |
|---|---|---|
| Yashica Electro 35 | PX32 | Manual |
| Yashica Electro 35 GL | PX32 | Manual |
| Yashica Electro 35 Gold Mecanica | PX32 | Manual |
| Yashica Electro 35 GS | PX32 | Manual |
| Yashica Electro 35 GS Gold Mecanica | PX32 | Manual |
| Yashica Electro 35 GSN | PX32 | Manual |
| Yashica Electro 35 GT | PX32 | Manual |
| Yashica Electro 35 GT Gold Mecanica | PX32 | Manual |
| Yashica Electro 35 GTN | PX32 | Manual |
| Yashica Electro 35 GTS | PX32 | Manual |
| Yashica Electro 35 Professional | PX32 | Manual |
| Yashica Electro AX | PX32 | Manual |
| Yashica Electro G | PX32 | Manual |
| Yashica Electro Half | PX32 | Manual |
| Yashica Kyocera Electro 35G | PX32 | |
| Yashica Kyocera Electro 35GL | PX32 | Manual |
| Yashica Kyocera Electro 35GN | PX32 | |
| Yashica Kyocera Electro 35GS | PX32 | Manual |
| Yashica Kyocera Electro 35GSN | PX32 | Manual |
| Yashica Kyocera Electro 35GT | PX32 | Manual |
| Yashica Kyocera Electro 35GTN | PX32 | Manual |
| Yashica Kyocera Electro Proffessional | PX32 | Manual |
| Yashica MG-1 | PX32 | Manual |
Looking for a different battery type?
We stock adapters and alternatives for hard-to-find battery types such as the PX625, PX27 and many more.
Browse all batteriesPX32 battery FAQ
What is a PX32 battery?
The PX32 is a 5.6-volt mercury battery, built internally as a stack of four 1.35 V mercury cells (designation HM-4N: “4 Hg cells”). From the late 1960s onward it was made by Mallory (as the TR164), Eveready (E164) and Varta (V164PX), among others, primarily for the Yashica Electro 35 family. Dimensions: about 16.5 mm in diameter × 45 mm long, considerably larger than today’s 6 V button-cell batteries. Like all mercury cells, it delivered a constant voltage over almost its entire discharge, which made it ideal for the Electro 35’s electronically controlled shutter speeds.
Which cameras need a PX32 battery?
It was used mainly across the entire Yashica Electro 35 rangefinder series: Electro 35, GS, GT, GSN, GTN, GTS, GL, AX, Electro G, Electro Half, the Gold Mecanica variants and the later Kyocera-branded models (35G, 35GL, 35GS, 35GSN, 35GT, 35GTN). It also powers the Yashica MG-1, the Konica Electron viewfinder camera and the Sekonic L-256 and L-258 light meters. You’ll find the full searchable list of all 26 models at the top of this page.
Why can’t you buy the PX32 anymore?
Mercury batteries like the PX32 were banned in the EU under the Battery Directive 2006/66/EC; in the USA, a comparable ban has been in place since 1996 under the Mercury-Containing and Rechargeable Battery Management Act. The last legal remaining stock had run out by around 2009. The reason isn’t the battery itself but the environmental damage mercury causes when it isn’t disposed of properly. The steady voltage that made them so popular from a technical point of view is only available indirectly today, through zinc-air or NiMH alternatives.
What are the options for replacing a PX32, and what are the pros and cons of each?
There’s no single “best” replacement; each option has its own strengths and weaknesses:
- 4LR44 (6 V alkaline) in an adapter: The standard solution. The 4LR44 is an inexpensive stacked battery you can buy anywhere (it’s used in dog collars, for example). It’s roughly 25 mm tall, and an adapter extends it to the 45 mm length of the PX32. At Ausgeknipst you can get it as a PX32 adapter including 4LR44 battery. Pro: cheap and easy to replace at any time. Con: alkaline voltage drops slightly over the battery’s life.
- 4SR44 (6.2 V silver oxide) in the same adapter: A drop-in swap, simply a silver oxide cell instead of the alkaline one. It costs more, but you get a much flatter voltage curve over the battery’s entire life, and it lasts longer. For a Yashica Electro 35 that sees heavy use, it’s the technically cleaner setup.
- Four stacked LR44/SR44 instead of a 4LR44: This works mechanically too, but it’s fiddly (four loose button cells have to be stacked with the correct polarity) and costs about the same as a ready-made 4LR44. Only use it as a stopgap when you don’t have a 4LR44 on hand.
- Original PX32 / TR164 / E164: Old stock occasionally turns up on eBay. Often, though, the cells have leaked or are deeply discharged, and selling new mercury cells into the EU is prohibited. Not recommended.
Does the voltage difference between 5.6 V mercury and 6 V alkaline affect exposure?
With the Yashica Electro 35 family, generally no, and that’s the key thing that sets it apart from other mercury-battery cameras. The Electro 35’s meter uses a bridge circuit that automatically compensates for voltage fluctuations over a wide range. So a 4LR44 (6 V) or 4SR44 (6.2 V) gives readings that, in practice, don’t differ from those with the original 5.6 V mercury cell. That’s exactly why the 4LR44 is the practical standard replacement here.
In theory, the usual principle applies: a higher voltage makes the meter think there’s more light than there is, leading to underexposure; a lower voltage leads to overexposure. Negative film is much more forgiving of overexposure than underexposure, so a slightly low voltage would tend to be the lesser evil. Even more important than the absolute value is consistency across the discharge curve: alkaline cells like the 4LR44 gradually drop off, while silver oxide (4SR44) holds its voltage much more steadily. On the Electro 35, thanks to the bridge circuit, neither is critical, but for fussy meters like the Sekonic L-256, the 4SR44 is the technically cleaner choice.