It is a good concept, but quality is not on par with wood/aluminum grip taking into consideration shipping cost: too much flex, tolerances like it is "made in China". While it makes the camera taller, the finger section is still very thin, does not bring needed level of comfort, especially with larger lenses like Voigtlander 58mm F1.4 SL II-S. For the reliable hold the grip should be bulkier, somewhat closer to N90's one in geometry. Basically, it need more volume to be really practical with Nikon F3 (which is not comfortable by design).
Alles was man braucht um durchzuziehen. Ohne das Kit wäre ich vermutlich erst später auf das Thema aufmerksam geworden. Besonders den Spiegeldämpfer hatte ich nicht auf dem Radar.
Well made and sturdy overall. The only minor issue is a small gap (just under 1 mm) between the top of the handle and the body, which causes a slight wobble during use. I fixed it easily with a small piece of self-adhesive mohair tape. The soft surface doesn't scratch the body, and now the handle feels solid.
Pas de soucis avec l'adaptateur et les piles, ça fait le job demandé.
MAIS ATTENTION au petit cache pour la griffe flash que vous fournissez en cadeau.
Il est trop épais et sur mon Minox 35GT il a endommagé le micro-switch sous la griffe et a dû être réparé. C'est le réparateur qui m'a indiqué cela.
N’est pas compatible avec le 503 CW. J’ai reçu remboursement de ausgeknipst donc pas de souci.
Justo lo que buscaba para poder llevar colgada la cámara y a punto para ser utilizada
Die ursprüngliche Batterie wurde aus Sicherheitsgründen von den Behörden aus dem Markt genommen. Vier Knopfzellen dienen als Ersatz. Die erste Lieferung umfasste diese vier. Dieses Batteriepacket hatte knapp keinen Platz in der Kamera. Nach diesem Hinweis erhielt ich sehr schnell eine kostenlose Lieferung mit drei plus einer Knopfzelle. Die vierte Knopfzelle war etwas kürzer und somit passte das ganze Packet in die Kamera.
Tried to use film strip cut with Ausgeknipst 120 to Minox slitter (120 film to 6x9.2mm, see my review of that slitter, too). The slitter produces too wide film for Minox use. Also these cassettes are too narrow for the film strips from the slitter so after placing the film into the cassette, film does not move at all in these. Not recommended!
This is supposed to produce 6 9.2mm wide film strips for Minox from a 120 film. In reality the width of the strips is way more than 9.2mm so too wide (like 9.4-9.6mm). I tried to use the film strip cut with this slitter with Ausgeknipst printed cassettes but film was jammed and did not move at all in the camera. Not recommended!
Der Artikel hat perfekt gepasst.. Verand war superschnell ... empfehlenswert